Measured Building Surveys – Happy Halloween allow our scanning teams to access some rather interesting and spooky places. With basements, attics to abandoned factories the team at M3S have all enjoyed exploring these areas while scanning to allow for a complete survey to aid the creation of plans and models.

Measured Building Surveying Using Laser Scanning

M3S use both a Leica RTC360 and Leica P40 laser scanner to capture the as built conditions on site. These scanners can capture data at rates of up to 2 million points per second on the RTC and up to 1 million points per second on the P40. To allow for a complete survey the team are often in basements, attics, abandoned buildings etc.  With such good coverage the CAD team can accurately draw and model all areas of the building.

Captured Data LIDAR From Measured Surveys  – Cyclone Register 360 / Cyclone Core

Once the data has been captured on site, the data is imported to Leica Cyclone.  If the RTC360 has been used with VIS is gets imported to Register 360 for an initial registration before being imported to Cyclone Core where full registration and further QC takes place. Once the registration, quality control and any additional survey control is added the registration is locked and the data exported to allow it to carry on to the production stage of the project.

“Spooky” Scenes From Previous Measured Building Surveys

The following scenes are snapshots from the point clouds that the scan team at M3S has captured this year…. with a little bit of “Photoshop” to help out!!

A haunting rural scene at a measured building survey with topo earlier this year a short drive outside Krakow. #MeasuredSurvey #LaserScanning #Topo #Halloween

Down in the deep, dark basements of an abandoned building in Eastern Europe for a scan to Revit model. Cyclone Core didnt quite manage to clean out the ghosts. #Haunted #Scan2BIM #CycloneCore #EveryDetailMatters

Our Scan Team were not so lucky when they surveyed this former factory – we have enough scan data for the crime scene team to investigate. #CrimeScene #Halloween2021 #EveryDetailMatters #JasonVoorhees #RTC360

More information  can be found on the official Leica Geosystems website  – click here

M3S Surveys Ltd – Laser Scanning, CAD, REVIT, Surveying and Photogrammetry Services:

Terrestrial Laser Scanning (TLS) – https://www.m3s-surveys.com/services/terrestrial-laser-scanning/

Topographic Surveys – https://www.m3s-surveys.com/services/topographic-surveys/

Photogrammetry – https://www.m3s-surveys.com/services/photogrammetry/

Aerial Surveys – https://www.m3s-surveys.com/services/aerial-surveys/

Spatial Data Analysis & Processing – https://www.m3s-surveys.com/services/spatial-data-analysis-processing/

Registration Tutorials For Leica Cyclone

Laser Scanning

Laser scanning became a standard in a toolkit of land surveyors, archaeologists, architects, engineers and many other fields. Despite fairly high cost of equipment and essential software, technology of laser scanning is enjoying ever-growing popularity. One could ask the question: ‘What makes it so special?’. Well, there are at least a few reasons. Below I will present a short, subjective list of the main ones.

Speed of surveying with laser scanner

One can not deny that the nominal number of points captured by laser scanners is unmatched by competition. Achieving capture rate of 1 million points a second is a todays standard, and in some cases declared values are reaching as high as 2 million points. What is worth noting is the speed at which the field work can be carried out using laser scanning. While carrying out complex measured building surveys, in which we are interested in the position in space of multiple elements laser scanning is unrivalled.

Quality of measurement with laser scanner

Accuracy of distance measurement with laser scanners is often in a range of +/-2 mm. Those values are not falling far from the accuracy achievable with a total station. If these technical conditions are completed with well planned and executed survey and following that correctly carried out scan registration, we can expect to derive a complete point cloud with absolute accuracy not exceeding +/- 5 mm.

Completeness of data acquired with laser scanning i.e. producing a digital twin

When speaking about data completeness what we have in mind is the percentage of subject’s surface represented by the final point cloud. Scanner will ‘cover’ with points every* surface which:

• is within the range of the scanner that is neither closer nor further than the range specified by the manufacturer,
• is not obscured by other objects including the scanner. Typically, the scanner placed on a tripod is unable to scan under itself.

Data completeness is ensured by setting up the scanner in multiple locations and on various heights. This approach enables creation of so-called digital twin, what allows exploration of the captured object at your desk.

*surface which will reflect the laser in a predictable manner

Point Cloud Data From Scan

Measured survey of the point cloud

Regularly calibrated laser scanner and correct execution of the survey guarantee that resulting point cloud is fully metric. This means that the point cloud can undergo analysis and form a basis for measurements without further manipulation such as sailing etc. It also means that we can estimate the accuracy of the survey what is essential for some applications.

Colour and intensity of point clouds

Laser scanners are measuring a bit more than just point position in Cartesian space. Laser scanners also register strength of reflection of the laser beam from a surface and optionally a series of images which can be used to apply realistic colour to the points. As a result, user can display the point clouds in colour and greyscale. It significantly simplifies interpretation and facilitates quick generation of additional products.

All of the above makes laser scanning a perfect tool for carrying out measured surveys of complex objects. Laser scanning significantly speeds up the fieldwork while captured data is reliable and relatively easy to interpret.

Laser Scanning – TruView LGS Point Cloud Viewer & IFC File

M3S Surveys Ltd – Scanning, CAD, REVIT, Surveying and Photogrammetry Services:

Terrestrial Scanning (TLS) – https://www.m3s-surveys.com/services/terrestrial-scanning

Building Surveys (MBS) – https://www.m3s-surveys.com/services/measured-building-surveys/

Topographic Surveys – https://www.m3s-surveys.com/services/topographic-surveys/

Photogrammetry – https://www.m3s-surveys.com/services/photogrammetry/

Aerial Surveys – https://www.m3s-surveys.com/services/aerial-surveys/

Spatial Data Analysis & Processing – https://www.m3s-surveys.com/services/spatial-data-analysis-processing/

M3S Surveys have been involved in carrying out measured surveys in Poland over the last 5 years. These range from residential property, hotels to large historical sites in cities including Kraków, Warsaw, Gdańsk, Katowice, Wrocław, Łódź and Kielce plus many smaller towns and rural areas. Our primary method of survey is via laser scanning. This allows the team to collect large amounts of data to create a point cloud. From the point cloud the M3S team can create measured survey drawings and 3D models. Our measured surveys include floor plans, elevations, cross sections and Revit models. Our team that is located in Poland can be on site within short notice. (*Our site is also available in Polish: Polish Language Website – https://www.m3s-surveys.com/pl/strona-glowna/  )

Our clients in Poland and the UK clients also receive TruViews via the Leica LGS format – these can viewed with a free piece of software from Leica Geosystems called TruView Viewer (PC only).  This allows each scan station on site to be visited from your desktop, mark up and take measurements along with the ability to insert an IFC file within the LGS point cloud version of the export. A basic example of this can be viewed in the following video:

REVIT

REVIT model created from laser scan data

Point Cloud From Measured Surveys In Poland

Point Clouds

Large scale measured survey – 100+ buildings, out door spaces and plant rooms

CAD Drawings

CAD – 2D elevations and topographical drawings

Topographical Survey

Survey control and topographical surveying

Historic Building Survey

Laser scanning measured survey of historical sites

M3S Surveys Ltd – Measured Surveys In Poland, CAD, REVIT, Surveying and Photogrammetry Services:

Terrestrial Laser Scanning (TLS) – https://www.m3s-surveys.com/services/terrestrial-laser-scanning/

Building Surveys (MBS) – https://www.m3s-surveys.com/services/measured-building-surveys/

Topographic Surveys – https://www.m3s-surveys.com/services/topographic-surveys/

Photogrammetry – https://www.m3s-surveys.com/services/photogrammetry/

Aerial Surveys – https://www.m3s-surveys.com/services/aerial-surveys/

Spatial Data Analysis & Processing – https://www.m3s-surveys.com/services/spatial-data-analysis-processing/

Links:

3D Revit Model – https://www.autodesk.co.uk/products/revit/overview?plc=RVT&term=1-YEAR&support=ADVANCED&quantity=1

Leica P40 Laser Scanner – https://leica-geosystems.com/en-gb/products/laser-scanners/scanners/leica-scanstation-p40–p30

Leica RTC360 Laser Scanner – https://leica-geosystems.com/products/laser-scanners/scanners/leica-rtc360

Capturing Reality (Photogrammetry) – https://www.capturingreality.com/

2D Cad Drawing – https://www.autodesk.co.uk/products/autocad/overview?plc=ACDIST&term=1-YEAR&support=ADVANCED&quantity=1

M3S Surveys Measured Surveys In Poland & Surveying Services Social Media Channels

• Twitter
• Facebook
• Instagram
• LinkedIn
• Pinterest
• Flickr
• YouTube

Polish Version Of This Blog Post – “nwentaryzacje architektoniczno budowlane”

Well 2021 so far has been busy, carried on from the busy end of 2020 in to 2021 with plenty of laser scanning in the UK and Poland.  The last 12 months with Covid have been a real roller coaster but thankfully due to the nature of many surveys taking place either out doors or in empty buildings many jobs have still managed to continue.  At M3S Surveys we are seeing an increase in demmand for laser scanning on smaller sites such as residential proprties that require detailed elevations, cross sections along with floor plans. All of our clients also recieve TruViews in the LGS format to allow them to view each scan station which can be shared with all the professional services involved in the project. One other advantage of the TruView LGS Viewer is that IFC can be load in and viewed against the point cloud.

Laser Scanning – TruView LGS Point Cloud Viewer & IFC File

Surveying Tools & Deliverable Files

Laser Scanning  – fast, accurate collection of all the visible points that is registered together to create a point cloud of your project.

Photography – we can capture standard high resolution imagery and a range of 360 images depending on the job specification.

UAV Photography – our partners in the UK & Poland are fully liscenced and insured to fly. The M3S team have years of experience on UAV projects including flying fixed wing and processing data.

Photogrammetry – the imagery captured with the UAV and terrestrial photography can be merged in specialist software and combined with laser scan data  and/or points surveyed using a total station for scale to produce high resolution ortho photos and models.

Land Surveying – survey control and topographical data captured.

2D & 3D Drawings – supply both 2D and 3D drawings and topos.

3D Revit Model – 3D model of as built conditions in various formats including Revit.

M3S Surveys Ltd – Laser Scanning, CAD, REVIT, Surveying and Photogrammetry Services:

Terrestrial Laser Scanning (TLS) – https://www.m3s-surveys.com/services/terrestrial-laser-scanning/

Building Surveys (MBS) – https://www.m3s-surveys.com/services/measured-building-surveys/

Topographic Surveys – https://www.m3s-surveys.com/services/topographic-surveys/

Photogrammetry – https://www.m3s-surveys.com/services/photogrammetry/

Aerial Surveys – https://www.m3s-surveys.com/services/aerial-surveys/

Spatial Data Analysis & Processing – https://www.m3s-surveys.com/services/spatial-data-analysis-processing/

Links:

3D Revit Model – https://www.autodesk.co.uk/products/revit/overview?plc=RVT&term=1-YEAR&support=ADVANCED&quantity=1

Leica P40 Laser Scanner – https://leica-geosystems.com/en-gb/products/laser-scanners/scanners/leica-scanstation-p40–p30

Leica RTC360 Laser Scanner – https://leica-geosystems.com/products/laser-scanners/scanners/leica-rtc360

Capturing Reality (Photogrammetry) – https://www.capturingreality.com/

2D Cad Drawing – https://www.autodesk.co.uk/products/autocad/overview?plc=ACDIST&term=1-YEAR&support=ADVANCED&quantity=1

The team at M3S Surveys Ltd would like to wish all clients, friends and family a Happy New Year. Let’s hope for a far better 2021!  With so many problems and hurdles caused with Covid 19, from travel bans, countries closed, businesses on furlough and others closed for good we have managed to battle through the year.

We have managed to carry on with our laser scanning & surveying through out 2020 delivering a range of products including point clouds, TrueView’s, 2D CAD drawings (elevations, cross sections, floor plans etc), 3D models (Revit), Topos and photogrammetry.

The range of industries we are now carrying out laser scanning has expanded further. This now includes engineers, planning consultants, architects, engineers, fabricators – all offering a range of services within the built environment, heritage, construction, food production, water and oil & gas.

Two of the main advantages our clients have found is the speed we can accurately survey with laser scanning (minimal to zero interruption to business, even less out of hours!) and the ability to re-visit the site through Leica Jet Stream Viewer on their desk top.

Here are a few images of some of the work we have been carrying out:

Happy New Year From All At M3S Surveys Ltd

Leica P40 – Laser Scanning & Surveying

Swan Engineering ( https://www.m3s-surveys.com/swan-engineering-fabrication-onsite-engineering/ )

Slice Through Point Cloud From Our Laser Scanning & Surveying Services

P40 Laser Scan Data – Industrial & Pipe Laser Scanning (https://www.m3s-surveys.com/services/terrestrial-laser-scanning/ )

Slice through point cloud in a basement

Scan2Bim Revit Model ( https://www.m3s-surveys.com/aec-mep-laser-scanning-and-model/ )

Plant Room & Pipe Laser Scan

Merry Christmas from M3S Surveys Ltd  ( https://www.m3s-surveys.com/merry-christmas/ )

M3S Surveys Ltd Services:

Terrestrial Laser Scanning (TLS) – https://www.m3s-surveys.com/services/terrestrial-laser-scanning/

Building Surveys (MBS) – https://www.m3s-surveys.com/services/measured-building-surveys/

Topographic Surveys – https://www.m3s-surveys.com/services/topographic-surveys/

Photogrammetry – https://www.m3s-surveys.com/services/photogrammetry/

Aerial Surveys – https://www.m3s-surveys.com/services/aerial-surveys/

Spatial Data Analysis & Processing – https://www.m3s-surveys.com/services/spatial-data-analysis-processing/

Links:

3D Revit Model – https://www.autodesk.co.uk/products/revit/overview?plc=RVT&term=1-YEAR&support=ADVANCED&quantity=1

Leica P40 Laser Scanner – https://leica-geosystems.com/en-gb/products/laser-scanners/scanners/leica-scanstation-p40–p30

Leica RTC 360 Laser Scanner – https://leica-geosystems.com/products/laser-scanners/scanners/leica-rtc360

2D Cad Drawing – https://www.autodesk.co.uk/products/autocad/overview?plc=ACDIST&term=1-YEAR&support=ADVANCED&quantity=1

Laser Scanning & Surveying Services Social Media Channels

• Twitter
• Facebook
• Instagram
• LinkedIn
• Pinterest
• Flickr
• YouTube

Instagram Video

The M3S Surveys team have been enjoying the recent upgrades in Leica Cyclone Register & Publisher Pro 2020.1 – including the LGS export for viewing within JetStream.  The latest release allows users of the FREE Jetstream Viewer to import models in IFC and OBJ formats to view them against the point cloud. An example of this can be seen in the following video from the Reality Capture expert, Paul Burrows of Leica Geosystems in the UK:

Leica Cyclone Register & Publisher Pro 2020.1 – M3S Surveys Ltd Experience:

M3S Surveys team members have been using the registration software since 2013 and have enjoyed all the upgrades throughout the years. Improving work flows, quality of registration, efficiency and superior outputs for viewing data and file formats for importing to 3rd party software. This included hands on training when two of our team members were also receiving official Leica training on how to use the Leica Scan station P40 laser scanner when it was first released.  With regular updates and improvements to both laser scanning firmware and software, and the various export modules including TruView Publisher (now called Publisher Pro) the team make sure they take part in all Leica webinars and videos on line.

One of the most popular requests from our clients are TruViews in the new Leica format, LGS. The LGS TruView file loads very quickly and smoothly on the majority of PC’s via Leica Jet Stream viewer (which is free!).

Leica Cyclone Register & Publisher Pro – LGS TruView being viewed in Jet Stream Viewer.

Laser Scanning Registration & Export Software – Leica Cyclone Register & Publisher Pro 2020.1 – case studies and further technical data – https://leica-geosystems.com/en-gb/products/laser-scanners/software/leica-cyclone

Terrestrial Laser Scanning (TLS) – https://www.m3s-surveys.com/services/terrestrial-laser-scanning/

Building Surveys (MBS) – https://www.m3s-surveys.com/services/measured-building-surveys/

Topographic Surveys – https://www.m3s-surveys.com/services/topographic-surveys/

Photogrammetry – https://www.m3s-surveys.com/services/photogrammetry/

Aerial Surveys – https://www.m3s-surveys.com/services/aerial-surveys/

Spatial Data Analysis & Processing – https://www.m3s-surveys.com/services/spatial-data-analysis-processing/

Links:

3D Revit Model – https://www.autodesk.co.uk/products/revit/overview?plc=RVT&term=1-YEAR&support=ADVANCED&quantity=1

Leica P40 Laser Scanner – https://leica-geosystems.com/en-gb/products/laser-scanners/scanners/leica-scanstation-p40–p30

2D Cad Drawing – https://www.autodesk.co.uk/products/autocad/overview?plc=ACDIST&term=1-YEAR&support=ADVANCED&quantity=1

Our Instagram – 3D Laser Scanning profile is starting to look as a bit better now with additional content added ever week: Click here to follow  –  https://www.instagram.com/m3ssurveysltd/

M3S Surveys Ltd are on the following social media platforms – please click the following links and like/share follow us on our social media channels for up to date photos and videos of our current projects. Our other profiles will be updated to match our Instagram – 3D Laser Scanning

Social Media

• Twitter
• Facebook
• Instagram
• LinkedIn
• Pinterest
• Flickr
• YouTube

Non Social Media – Do You Need Any Laser Scanning or Land Surveying Services Carried Out?

Surveying for Architect, Engineer or Planning Consultant

(Laser Scanning & Land Surveying)

Terrestrial Laser Scanning (TLS) – https://www.m3s-surveys.com/services/terrestrial-laser-scanning/

Building Surveys (MBS) – https://www.m3s-surveys.com/services/measured-building-surveys/

Topographic Surveys – https://www.m3s-surveys.com/services/topographic-surveys/

Photogrammetry – https://www.m3s-surveys.com/services/photogrammetry/

Aerial Surveys – https://www.m3s-surveys.com/services/aerial-surveys/

Spatial Data Analysis & Processing – https://www.m3s-surveys.com/services/spatial-data-analysis-processing/

Links:

3D Revit Model – https://www.autodesk.co.uk/products/revit/overview?plc=RVT&term=1-YEAR&support=ADVANCED&quantity=1

Leica P40 Laser Scanner – https://leica-geosystems.com/en-gb/products/laser-scanners/scanners/leica-scanstation-p40–p30

2D Cad Drawing – https://www.autodesk.co.uk/products/autocad/overview?plc=ACDIST&term=1-YEAR&support=ADVANCED&quantity=1

Social Media – Jet Stream Viewer:

The following image and video are a quick snap shot of how many of our clients are using the point cloud data on their local machines – with out the need of a fancy PC or expensive software they can view, measure and take snap shots from the point cloud. This has proven extremely valuable with in the planning process. You can also easily record video from your point cloud in Jet Stream which creates great content that can be shared on social media.

Jet Stream Viewer

Do You Need A Topographical or Measured Building Survey – Architects, Planners, Engineers & Conservation

The M3S Surveys team have years of experience carrying out small to large scale as built measured building surveys using a range techniques including laser scanning. Many of our clients are work within the built environment and are architects and planners. Our models, drawings and 3D data can be viewed with easily from your the comfort of your desk.

Large Measured Building & Topo Survey (Scan to Revit) – As Built Measured Building Surveys

Do You Need Any Laser Scanning Carried Out For As Built Measured Building Surveys?

If you need any Laser Scanning related tasks mentioned on this page or require some further information on the range of CAD, Topographical and Measured Building Surveys then please feel free to contact us directly via the form on the contact page or via our social media channels on Instagram, Facebook, Twitter or LinkedIn./

Desk top site visit – Jet Stream Viewer:

The following image and video are a quick snap shot of how many of our clients are using the point cloud data on their local machines – with out the need of a fancy PC or expensive software they can view, measure and take snap shots from the point cloud. This has proven extremely valuable asset for all of the professional services we supply data for. The LGS Jet Stream Viewer (free software) can load up LGS files very quickly and allow of the key stakeholders simple and instant access to the point cloud and 360 views from each scan station location. Even a simple screen grab from this to aid planning applications has proven highly cost effective.

Jet Stream Viewer

Services For As Built Measured Building Surveys:

Please view the following links/pages to see further information and examples on the various services M3S Surveys Ltd offer.

Terrestrial Laser Scanning (TLS) – https://www.m3s-surveys.com/services/terrestrial-laser-scanning/

Building Surveys (MBS) – https://www.m3s-surveys.com/services/measured-building-surveys/

Topographic Surveys – https://www.m3s-surveys.com/services/topographic-surveys/

Photogrammetry – https://www.m3s-surveys.com/services/photogrammetry/

Aerial Surveys – https://www.m3s-surveys.com/services/aerial-surveys/

Spatial Data Analysis & Processing – https://www.m3s-surveys.com/services/spatial-data-analysis-processing/

Links:
3D Revit Model – https://www.autodesk.co.uk/products/revit/overview?plc=RVT&term=1-YEAR&support=ADVANCED&quantity=1

Leica P40 Laser Scanner – https://leica-geosystems.com/en-gb/products/laser-scanners/scanners/leica-scanstation-p40–p30

2D Cad Drawing – https://www.autodesk.co.uk/products/autocad/overview?plc=ACDIST&term=1-YEAR&support=ADVANCED&quantity=1

The M3S Surveys Ltd team have been utlising laser scanners for the last 10+ years. With rapid advances in technology and software with both instruments and computing power the team have always kept up to date with this. While constantly reviewing and improving workflows in the field and within the software. There are a range of poducts that can be produced and delivered from laser scanned point cloud data, these include 2D drawings & 3D Revit Models (“as built survey”), TruViews, LGS JetStream, Topo Survey, Ortho Images.

Please check out our laser scanning page for more information – https://www.m3s-surveys.com/services/laser-scanning/

3D Revit Model From Laser Scan Point Cloud Data

Leic P40 Laser Scanner

2D CAD Drawing From Laser Scanned Data

If you need any Laser Scanning related tasks mentioned on this page or require some further information on the range of CAD, Topographical and Measured Building Surveys that M3S carry out, please feel free to contact us directly via the form on the contact page or via our social media channels on Instagram, Facebook, Twitter or LinkedIn.

 

Desk top site visit from As Buillt Survey – Jet Stream Viewer:

The following image and video are a quick snap shot of how many of our clients are using the point cloud data on their local machines – with out the need of a fancy PC or expensive software they can view, measure and take snap shots from the point cloud. This has proven extremely valuable with in the planning process.

Jet Stream Viewer

As Built Survey – Laser Scanning & Photogrammetry (Reality Capture)

Services for As Built Survey

Links:

3D Revit Model – https://www.autodesk.co.uk/products/revit/overview?plc=RVT&term=1-YEAR&support=ADVANCED&quantity=1

Leica P40 Laser Scanner – https://leica-geosystems.com/en-gb/products/laser-scanners/scanners/leica-scanstation-p40–p30

2D Cad Drawing – https://www.autodesk.co.uk/products/autocad/overview?plc=ACDIST&term=1-YEAR&support=ADVANCED&quantity=1

The M3S Surveys team have been enjoying the recent upgrades in Leica Cyclone Register & Publisher Pro 2020.1 – including the LGS export for viewing within JetStream.  The latest release allows users of the FREE Jetstream Viewer to import models in IFC and OBJ formats to view them against the point cloud. An example of this can be seen in the following video from the Reality Capture expert, Paul Burrows of Leica Geosystems in the UK:

M3S Surveys Ltd – Laser Scanning, CAD, REVIT, Surveying and Photogrammetry Services:

Terrestrial Laser Scanning (TLS) – https://www.m3s-surveys.com/services/terrestrial-laser-scanning/

Building Surveys (MBS) – https://www.m3s-surveys.com/services/measured-building-surveys/

Topographic Surveys – https://www.m3s-surveys.com/services/topographic-surveys/

Photogrammetry – https://www.m3s-surveys.com/services/photogrammetry/

Aerial Surveys – https://www.m3s-surveys.com/services/aerial-surveys/

Spatial Data Analysis & Processing – https://www.m3s-surveys.com/services/spatial-data-analysis-processing/

Links:
3D Revit Model – https://www.autodesk.co.uk/products/revit/overview?plc=RVT&term=1-YEAR&support=ADVANCED&quantity=1

Leica P40 Laser Scanner – https://leica-geosystems.com/en-gb/products/laser-scanners/scanners/leica-scanstation-p40–p30

Leica RTC360 Laser Scanner – https://leica-geosystems.com/products/laser-scanners/scanners/leica-rtc360

Capturing Reality (Photogrammetry) – https://www.capturingreality.com/

2D Cad Drawing – https://www.autodesk.co.uk/products/autocad/overview?plc=ACDIST&term=1-YEAR&support=ADVANCED&quantity=1

M3S Surveys Laser Scanning & Surveying Services Social Media Channels

• Twitter

• Facebook

• Instagram

• LinkedIn

• Pinterest

• Flickr

• YouTube